Timken 23068EMB SPHERICAL ROLLER BEARINGS

r1a max:0.3 mm; r1s min:0.3 mm; Nlim (oil):110,000 rpm; Max operating temperature, Tmax:120 °C; rs min:0.3 mm; Characteristic rolling element frequency, BSF:3.98 Hz; db min:14.5 mm; D2:25.22 mm; Contact angle α:15 °; Preload level:8;

Min operating temperature, Tmin:-20 °C; Track load capacity spherical outer ring:8.05 kN; F:44.5 mm; Characteristic rolling element frequency, BSF:14.93 Hz; Nlim (grease):3,300 rpm; Brand:NTN; B:29 mm; Lw:19 mm; Characteristic inner ring frequency, BPFI:16.53 Hz; Precision class:P0;

B:28 mm; Characteristic cage frequency, FTF:0.44 Hz; Dynamic load, C:85 kN; Radial clearance class:CM; Characteristic outer ring frequency, BPF0:6.59 Hz; rs min:2 mm; Characteristic rolling element frequency, BSF:8.1 Hz; da max:136 mm; Nlim (grease):2,100 rpm; Max operating temperature, Tmax:110 °C;

Weight:2.22 kg; S:19 mm; H1:13 mm; T max.:100 °C; s1:24.6 mm; A:60 mm; L:120 mm; Designation of housing:PA209N-; Dz:95 mm; H:54.2 mm;

C0:11.2 kN; r:0.6; B:39 mm; T max.:100 °C; D:62 mm; SW:3 mm; S:15.9 mm; T min.:-20 °C; C:19 mm; d:30 mm;

L1:47 mm; L:158 mm; G:R1/8"; C:19.5 kN; T max.:100 °C; d1:44.1 mm; B:23.8 mm; H1:17 mm; A:40 mm; Weight:1.11 kg;

A:44 mm; B1:43.7 mm; d:49.21 mm; S:11 mm; G:R1/8"; s1:33.4 mm; J:111 mm; A2:60.7 mm; Designation of bearing:ES210-31G2T04; L:143 mm;

Snap ring reference:R80; Brand:SNR; Static load, C0:17.9 kN; Db min:88 mm; rNs min:0.5 mm; ra max:1 mm; Ca max:4.98 mm; B:18 mm; da max:50.3 mm; b min:1.9 mm;

H2:86 mm; T max.:100 °C; J:76.2 mm; Recommended tightening torque for set screw:3.9 Nm; A:38 mm; H:42.9 mm; s1:19.05 mm; Designation of housing:SPA206N-; H1:12 mm; N:M10;

s1:15 mm; C0:11.2 kN; Designation of housing:FA206N-; J:117 mm; J1:58 mm; G:M6x1; T max.:100 °C; d:28.58 mm; Dz:70 mm; L1:72 mm;

L1:42 mm; B:34 mm; A1:26 mm; T min.:-20 °C; Designation of open end cover:SCOU205-15; N:13mm; d:23.81 mm; C:14 kN; Designation of housing:P205N-; H1:16 mm;

Z:22.5 mm; B:22 mm; L:57 mm; N:12mm; d:12 mm; T min.:-20 °C; A2:31 mm; C:9.55 kN; C0:4.78 kN; e:15 mm;

H:113 mm; A1:11 mm; Recommended tightening torque for set screw:5.5 Nm; B:25 mm; Designation of open end cover:SCO204-20; Z:37 mm; L:60 mm; s1:12.5 mm; C0:6.65 kN; A:25.5 mm;

C0:32.8 kN; Designation of housing:FE212N-; Weight:4.97 kg; T max.:100 °C; A2:73.7 mm; Dz:120 mm; S:25.4 mm; G:R1/8"; J:143 mm; s1:32.55 mm;

C:25.7 kN; B:32 mm; Z:50.7 mm; d:34.92 mm; e:21 mm; Designation of open end cover:SCOU207-22; T max.:100 °C; C0:15.2 kN; J:92 mm; A:36 mm;