BARDEN "208HC " High Reliability Precision Bearings

Fillet Radius ra:0.04 in; Fillet Radius rb:0.024 in; B:0.6250 in; Oil Speed Rating n2:22000 rpm; Basic Dynamic Radial Load Rating C:29600 N; Grease Speed Rating n1:8200 rpm; Basic Static Radial Load Rating Co:23600 N; D:3.1875 in; d:1.875 in;

Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:7000 rpm; Sealed Speed Rating n3:3600 rpm; Basic Dynamic Radial Load Rating C:13000 N; Basic Static Radial Load Rating Co:13700 N; B:10.00 mm; D:100.0000 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; d:80.000 mm; Fillet Radius ra:0.60 mm;

d:95.000 mm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:111000 N; D:170.0000 mm; Grease Speed Rating Open/Shielded n1:3100 rpm; Basic Static Radial Load Rating Co:118000 N; Fillet Radius ra:2.00 mm; B:32.00 mm; Oil Speed Rating Open/Shielded n2:3800 rpm;

End plug (suffix Y):EPR 11; Lock nut:AN 18; P150°:44.5 kN; Stabilizing ring:2 x SR-1618; P90°:77 kN; Bearing:1318; PG:1/4 NPT; Ca:73.787 mm; R2:28.575 mm; A2:174.625 mm;

Sealed Speed Rating n3:5600 rpm; Accessories:Shield & Seal; B:18.00 mm; Grease Speed Rating Open/Shielded n1:8500 rpm; Fillet Radius ra:1.00 mm; d:40.000 mm; Basic Static Radial Load Rating Co:19000 N; Oil Speed Rating n2:10000 rpm; D:80.0000 mm; Grease Speed Rating n1:8500 rpm;

A:10 mm; d1:950 mm; Mass adapter sleeve assembly:842 kg; B1:609 mm; B:125 mm; Lock nut:HM 31/1000; B5:154 mm; Hydraulic nut:HMV 200E; G2:G 1/8; G:Tr 1000x8;

Oil:571.310 kN; with cylindrical bore:560 min-1; Static (Cor):22.3 mm; Pu:4250 kN; B:192 mm; Dynamic (Cr):12 mm; with tapered bore:700 min-1; D:600 mm; rs (min):5 mm; d:360 mm;

Cap bolt, SAE grade:8; Da:180 mm; h:42.069 mm; A1:111.125 mm; Bearing:22220 EK; RG:3/8 NPT; S:4.763 mm; A2:155.575 mm; Initial grease fill:181.44 g; P60°:141 kN;

Calculation factor e:0.33; B:419.1 mm; Design variant/feature:TQOESN/GW; Basic static load rating C0:13700 kN; Calculation factor Y2:3; Comparative axial load rating CFa:213 kN; Calculation factor Y0:2; T:330.2 mm; Calculation factor Y1:2; D:615.95 mm;

L:711.2 mm; ba:78.581 mm; da:177.8 mm; Taconite seal:TER 156; RG:1 NPT; Initial grease fill:1672.65 g; Max. speed for Taconite seal:440 r/min; End plug (suffix Y):EPR 21; H:398.462 mm; A1:190.5 mm;

Basic Interchange NDH:WC87008; Width - Outer Ring B0:10.3 mm; Basic Radial Load Rating-Dynamic DC:3320 N; Basic Interchange BCA:-; D:24.0000 mm; Basic Interchange FAF:38KVTD; d:8.000 mm; Old MRC Bearing Number:38FSF2; Fillet Radius ra:0.30 mm; Width - Inner Ring B1:9.80 mm;

h:30.163 mm; Pa:4.14 kN; Da:100 mm; Labyrinth ring:2 x LER 23; H:133.35 mm; Bearing:22211 EK; P90°:27.1 kN; Cap bolt:2 x 1/2-13 UNC; J max.:209.55 mm; Housing:SAF 511;

Fillet Radius ra:2.00 mm; D:170.0000 mm; B:55.60 mm; Basic Static Radial Load Rating Co:146000 N; Accessories:Shield & Seal & Snap; Basic Dynamic Radial Load Rating C:159000 N; Oil Speed Rating n2:3200 rpm; Sealed Speed Rating n3:2200 rpm; d:95.000 mm; Grease Speed Rating n1:2200 rpm;

Fillet Radius ra:2.00 mm; Grease Speed Rating n1:0 rpm; Oil Speed Rating n2:2800 rpm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:180000 N; Basic Dynamic Radial Load Rating C:156000 N; B:38.00 mm; D:240.0000 mm; d:160.000 mm;

Basic Dynamic Radial Load Rating C:201000 N; Basic Static Radial Load Rating Co:236000 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3400 rpm; Grease Speed Rating n1:2400 rpm; D:170.0000 mm; Sealed Speed Rating n3:2400 rpm; d:80.000 mm; B:68.30 mm; Accessories:Two Shields & Snap-R;